7 Problems With Glue Down Vinyl Plank Flooring

What Is Glue Down Vinyl Plank Flooring

Glue-down vinyl plank flooring also know as Adhesive vinyl flooring has grown in popularity over the past decade due to its low price, durability, and simplicity of maintenance. However, as with any type of flooring, it might develop problems with time. In this article, we’ll look at some of the most typical challenges that homeowners or even commercial areas  may have come across with glue-down vinyl plank flooring and also offer practical answers to these problems with glue down vinyl plank flooring.

Glue Down Vinyl Flooring


1. Adhesive Failureor Glue Fail


The glue failure is one of the most prevalent issues with glue-down vinyl plank flooring especially if you buy low quality flooring. When the glue connection between the glue down vinyl plank flooring and the sub-floor deteriorates, the planks will start to lift or separate from the sub-floor. This problem is very common and this may also be a result of poor installation practice.


To repair, you may need to remove the afflicted planks and apply new glue to repair adhesive failure. Before restoring the boards, make sure the flooring is clean, dry, and level. It is critical for a good repair to use the specified glue and follow the manufacturer’s recommendations.

You may also check our article on how to replace a damaged vinyl plank.

On the other hand, it is very important to make sure your follow the recommended steps on how to properly install glue-down vinyl flooring. We have a step by step article and videos on our website that can help you on how to install glue-down flooring with or without a professional.

Adhesive Failureor Glue Fail


2. Gaps Between Planks


Gaps between the planks of glue down vinyl plank flooring can form over time, spoiling the look and possibly exposing the sub-floor. This is may be cause by the changing of temperatures but year seasons or can be caused by poor installation practice. In some rare cases, this may also be caused by use of poor quality of glue being used on installation or even poor installation.


To prevent gaping or gaps, apply a vinyl floor seam sealer, which can be found at most home improvement stores. Seal the gaps with sealant to connect the boards and prevent additional separation. Regular maintenance, such as keeping indoor humidity levels steady, can help avoid gaping. Although the gaps between the planks are useful to allow expansion and contraction due to changes in room temperature and climate changes as will.

Gaps Between Planks


3. Scratches and Scuffs


Although vinyl plank flooring is noted for its durability, it is susceptible to scratches and scuffs, particularly in high-traffic areas. This is not a problem for glue-down floors only, so many type of floors faces this type of problem. If you have pets in the house this will be a problem since pet paws are always going to live some mark to your floors. This may also be caused when moving heavy furniture around the house. Push them may damage the floors leaving mark and scratches make the floor look so terrible.


Use felt or rubber furniture pads beneath heavy furniture legs to reduce scratches and scuffs, and lay rugs or mats in high-traffic areas. If scratches do appear, a vinyl floor repair kit may be used to fill in and conceal small flaws. Consider replacing the damaged plank with a new one for deeper scratches. However if the scratches are too deep, you may come to a point of replacing the damaged flooring plank completely. This is a good reason to always make sure you have extra planks at home in the event that you may need to replace damage a plank on your floor.

Scratches and Scuffs


4. Moisture Damage


Although glue-down vinyl is water-resistant, excessive moisture can cause warping or cupping. This may come as an advise to anyone who have glue-down vinyl flooring, to make sure not to abuse the water-resistant properties of this vinyl flooring. Although they are water-resistant, it doesn’t mean they wont be affected by heavy or excessive  moisture.


Before installation, check the moisture levels in the sub-floor. Consider installing a waterproofing layer or padding under the vinyl planks if moisture is an issue. Use rugs or mats to catch liquids in places prone to spills or wetness. To prevent water from leaking between the boards, clean up any spills as soon as possible.

Moisture Damage


5. Discoloration or color fading


Discoloration of vinyl plank flooring can result from exposure to direct sunlight or chemical reactions with certain cleaning agents. This is a annoying problem because in most situation the structure of the flooring will still in good conditions but with a fading decoration layer due to excessive sunlight, chemical reactions and even caused by buying poor quality flooring.


Use shades, curtains, or UV-blocking window films to restrict direct sunlight exposure to avoid discoloration. Avoid using strong chemicals, abrasive scrubbers, or excessive water when cleaning. To keep the appearance of the flooring, use the cleaning solutions indicated by the manufacturer. We have an article that force on how to prevent your vinyl flooring from fading and you may visit our website if you need more information.

color fading


6. Peeling Edges


Over time, the edges of vinyl planks may start to peel or curl up, creating a tripping hazard. Although this problem is not so common, it so often common on those flooring that haven’t properly been installed or not finished installation process. This causes the floor edges to peel off or to lift.


Attach the peeling edges using a high-quality glue. To establish a firm bond, apply pressure and utilize heavy objects or weights to keep the edges down until the glue dries. Peeling edges must be addressed immediately to avoid further damage. This problem can also be easily prevented by properly installation process. When installing vinyl flooring, make sure you also install the additional accessories that prevent the peeling off of the flooring edges. You can visit our accessories page for vinyl flooring and get more inform on how to protect your flooring.

Peeling Edges


7. Staining


Spill stains, like red wine or ink, can occasionally detract from the aesthetic of vinyl plank flooring.


To avoid stains, mop up spills as soon as possible. For tough stains, use a mild dish soap and warm water combination, or follow the manufacturer’s stain removal instructions. Avoid using abrasive scrubbers or strong chemicals that might harm the surface of the vinyl.




These are some of problems with glue down vinyl plank flooring that you can come across when working with Adhesive flooring. While glue-down vinyl plank flooring is a long-lasting and low-cost option, it is not immune to common problems that might occur over time. Fortunately, most issues have simple fixes that homeowners may adopt on their own. Maintaining the longevity and look of your vinyl plank flooring requires regular care, appropriate installation, and according to manufacturer requirements. By fixing these frequent issues as soon as possible, you will be able to enjoy the beauty and utility of your flooring for many years to come.

Scroll to Top